Tagged: EIGRP

RTA LOGO 0

Certifications / Networking / Projects / Technology

December 16, 2012

EIGRP Frame Relay Test Lab

I was able to successfully complete the EIGRP Labs that were included with the CCNP Route CBT Nuggets. I know my hurdle was the frame relay. I decided to make a large topology within GNS3. The lab was set up using a similar IP addressing scheme. It consisted of 4 routers connected to a frame relay cloud. Each router had a single Serial Interface connected to the cloud. I used 3 sub interfaces on each router ending in a total of 6 DLCI’s for Full Mesh Topology.  I set up the wan links using point to point sub interfaces and...

0

Certifications / Networking / Personal / Projects / Technology

December 15, 2012

My CCNP Certification Progress

CCNP Route Part 2   It has been a couple of days since I started my CCNP Route studying and I have hit my first stumbling point.  It wasn’t the configuration of  EIGRP as a whole. I was able to remember and grasp the concepts of Passive Interfaces, Network Commands, Un-Equal Cost Load Balancing as well as authentication and utilizing the bandwidth percent command. The problem that I was having was the configuration of frame relay. The frame relay lab topology I was working with has 3 routers in a hub and spoke topology. The simulated wan backbone was a...

Ron the admin Logo 0

Certifications / Networking / Personal / Projects / Technology

December 14, 2012

My CCNP Certification Progress

CCNP Route Part 1. It has been close to 3 months since I picked up any CISCO Certification books or materials. There has been so much going on and I had to put some of my goals on hold while I sorted everything out. Since I have been sick due to vertigo, dizziness and bouts of light-headed feelings I figured it would be good for me to get back on track. I have started watching the CBT Nuggets CCNP Route video series. So far I have completed the the first 6 videos in the series. The first video is an...

Archives

Categories