Tagged: routers

0

Websites, Router Updates and Failures Oh My

Today, has been an interesting day to say the least. I dropped off my laundry to get laundered and I went out to lunch with my family at a really good BBQ joint where the food was awesome. Prior to going out and doing my errands and even after that I have been toiling around the computer trying to get one of the websites I manage up and running correctly. About 3 weeks ago I did an upgrade for the forums software I use on the site and the upgrade went a bit wonky. At first I thought it was...

0

Routing Notes « networknight

I have found this good article on wordpress. I thought it was good for everyone to read if they are working on taking the CCNP Routing exam. I hope this helps many people. I give credit to Longstreak for a  good write up. RTA ROUTING NOTES December 4, 2012 · by longstreak · in Networking Basics Routing Notes « networknight. Key points that I only understood fully when studying for the CCNP routing exam this time around: Redistribution: Routes are redistributed into the destination protocols topology table/database, no the Routing Information Base (RIB). Routes must have made it into the RIB from the source protocol to be considered for redistribution into...

RTA LOGO 0

EIGRP Frame Relay Test Lab

I was able to successfully complete the EIGRP Labs that were included with the CCNP Route CBT Nuggets. I know my hurdle was the frame relay. I decided to make a large topology within GNS3. The lab was set up using a similar IP addressing scheme. It consisted of 4 routers connected to a frame relay cloud. Each router had a single Serial Interface connected to the cloud. I used 3 sub interfaces on each router ending in a total of 6 DLCI’s for Full Mesh Topology.  I set up the wan links using point to point sub interfaces and...