The Network Admin
Single Area OSPF « packetroute. I found this great Single Area OSPF Tutorial online. I thought it was well written and offered a lot of information. I give a kudo’s to the author of this blog and hence why I am rebloging the link. I hope everyone finds it useful. RTA
I was able to successfully complete the EIGRP Labs that were included with the CCNP Route CBT Nuggets. I know my hurdle was the frame relay. I decided to make a large topology within GNS3. The lab was set up using a similar IP addressing scheme. It consisted of 4 routers connected to a frame relay cloud. Each router had a single Serial Interface connected to the cloud. I used 3 sub interfaces on each router ending in a total of 6 DLCI’s for Full Mesh Topology. I set up the wan links using point to point sub interfaces and...
CCNP Route Part 2 It has been a couple of days since I started my CCNP Route studying and I have hit my first stumbling point. It wasn’t the configuration of EIGRP as a whole. I was able to remember and grasp the concepts of Passive Interfaces, Network Commands, Un-Equal Cost Load Balancing as well as authentication and utilizing the bandwidth percent command. The problem that I was having was the configuration of frame relay. The frame relay lab topology I was working with has 3 routers in a hub and spoke topology. The simulated wan backbone was a...
Recent Comments